Appendix A • Mounting compatibility
Appendix A
Power Panel 500 user's manual V1.40
293
5.2 Compatibility details
5.2.1 Example
The dimensions (all in mm) shown in this image apply to the other figures below.
Spacing (right)
Spacing (to edge of device)
Spacing (top)
Spacing (to edge of device)
Spacing (left)
Spacing (to edge of device)
Space to edge of device on bottom
e.g. depends on device type
Specification of difference
Outer contour of device
Cutout for PP100/200/300/400 device
PP100/200/300/400
AP900/PPC700
13 PP100/200/300/400
8.5 AP900, PPC700, PP500
Cutout for AP900/PPC700/PP500 device
4.5
423 x 288
10
10
8.5
Installation dimensions
e.g. depends on device type
Outer dimensions
PP500
403 x 271
402 x 266.5
Figure 168: Overview of compatibility figures
5.2.2 5.7" devices
Cutout tolerance values for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 are ±0,5 mm.
The cutout tolerance values from the AP1000 are +0 mm/-0.5 mm.
212 x 156
199 x 143
6.5
6.5
6.5
6.5
PP100/200/300/400
Outer contour of device
Cutout for device
PP500
AP1000
Figure 169: Mounting compatibility - 5.7" device - Horizontal1
5.7" Automation Panel 1000, Power Panel 500 devices and Power Panel 100/200/300/400 devices are 100%
mounting compatible in the Horizontal1 format.