B&R 5PP520.0573-00, Руководство пользователя

Страница: 192 / 319

Software • BIOS options
192 Power Panel 500 user's manual V1.40
InsydeH2O Setup Utility Rev. *
Advanced
Console Redirection Setup
Console Serial Redirect <Enabled>
Information Wait Time <5 Seconds>
Serial Port <COM_A>
Terminal Type <PC_ANSI>
Baud Rate <57600>
Data Bits <8 Bits>
Parity <None>
Stop Bits <1 Bit>
Flow Control <None>
ACPI SPCR Table <Disabled>
F1 F9
Esc Enter F10
Help Select Item Change Values Setup Defaults
Exit Select Menu Select SubMenu Save and Exit
F5/F6
Figure 117: US15W Advanced - Console Redirection
BIOS setting Function Configuration options Effect
Enabled Enables this function Console serial redirect Option for configuring the remote console. The
remote console can be used to access BIOS Set-
up via the serial interface using a terminal emu-
lator (PuTTY or HyperTerminal).
Information:
This setting is automatically enabled
when using an APC511 without an I/O
board and mode/node switch position
"00" (default).
Disabled Disables this function
Information wait time Option for configuring the amount of time for the
remote console to wait before accessing BIOS for
the first time
0 seconds, 2 seconds, 5 sec-
onds, 10 seconds, 30 seconds
The remote console waits x seconds before ac-
cessing BIOS for the first time.
COM_A Uses the COMA serial interface for access
COM_B Uses the COMB serial interface for access
COM_C Uses the COMC serial interface for access
COM_D Uses the COMD serial interface for access
Serial port Option for configuring the serial interface
All ports TBD
VT_100 Enables the VT100 convention (ASCII charac-
ter set)
Enables the VT100+ convention (ASCII charac-
ter set and support for color, function keys, etc)
VT_UTF8 Enables the VT-UTF8 convention (uses UTF8
encoding to assign Unicode characters to one
or more bytes)
Terminal type Option for configuring keyboard input
PC_ANSI Enables the PC ANSI convention (extended
ASCII character set).
Baud rate Option for setting the transfer rate of the serial
interface (bits per second)
1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200
Enables a transfer rate of x bits
7 bits Character length with 7 bits Data bits Option for configuring the character length (data
bits) to use for serial communication
8 bits Character length with 8 bits
None Parity bit not used
Even Uses an even number of parity bits
Parity Option for configuring the parity bit to use for se-
rial communication
Odd Uses an odd number of parity bits
1-bit Uses 1 bit as the stop bit Stop bits Option for configuring the stop bits to use for se-
rial communication
2-bit Uses 2 bits as the stop bit
Flow control Option for configuring the data flow control None Disables data flow control
Table 133: US15W Advanced - Console redirection - Configuration options