Software • BIOS options
184
Power Panel 500 user's manual V1.40
1.5.5 Video configuration
InsydeH2O Setup Utility Rev. *
Advanced
Select the amount of
Pre-allocated Memory
that the Internal
Graphics Device will
use. Warning: Some
features may not support
with 1MB Pre-allocated
Memory.
Video Configuration
IGD - Pre-Allocated <UMA = 8MB>
Memory
IGD - Boot Type <Auto>
IGD - LCD Panel Type <640x480 (5.7) LVDS>
Remote Panel
<Disabled>
F1
F9
Esc
Enter
F10
Help Select Item
Change Values Setup Defaults
Exit Select Menu
Select SubMenu
Save and Exit
F5/F6
Figure 111: US15W Advanced - Video Configuration
BIOS setting
Function
Configuration options
Effect
UMA = 1 MB
Allocates 1 MB main memory
UMA = 4 MB
Allocates 4 MB main memory
IGD - Pre-allocated memo-
ry
Option for setting the amount of memory used for
the internal graphics controller
Information:
Some functions are not supported with
the setting "UMA = 1 MB".
UMA = 8 MB
Allocates 8 MB main memory
Auto
Automatically selects one of the panels listed
under "IGD - LCD panel type"
LFP(LVDS)
Shows POST on the Power Panel 500 display
(LFP = local flat panel)
IGD - Boot type
Option for defining the enabled panel during
POST
EFP(SDL or DVI)
Shows POST on an external panel (EFP = ex-
ternal flat panel)
640x480 (5.7) LVDS
640 x 480 resolution (for 5.7" displays)
800x480 (7.0) LVDS
800 x 480 resolution (for 7" displays)
800x600 (8.4) LVDS
800 x 600 resolution (for 8.4" displays)
640x480 (10.4) LVDS
640 x 480 resolution (for 10.4" displays)
800x600 (12.0) LVDS
800 x 600 resolution (for 12.0" displays)
IGD - LCD panel type
1)
Option for configuring the display resolution
Information:
If the display setting is present in the
EPROM data, then this setting has no
effect on the display resolution. This
is because the EPROM data is loaded
each time the system is restarted and
the BIOS setting is overwritten.
1024x768 (15.0) LVDS
1024 x 768 resolution (for 15" displays)
Enabled
Enables this function
Remote Panel
2)
Option for controlling the device remotely (with no
display connected) from another PC via the Eth-
ernet interface. This makes it possible to make
BIOS settings.
Disabled
Disables this function
Table 127: US15W Advanced - Video configuration - Configuration options
1)
This setting is only available for PP500 system units.
2)
This setting is only shown if an I/O board is installed. This option does not appear if a display is connected or integrated. It is also shown on APC511 system
units if no I/O board is installed.