B&R Industries Power Panel 300, Руководство пользователя

Страница: 439 / 612

Software • Power Panel 300 with BIOS
Ch
apte
r 4
Soft
w
are
439 Power Panel 300/400 User's Manual V 2.30
Motherboard device configuration - video and flat panel
COM D Configures the UART address range and
the corresponding interrupt for the touch
controller.
Information:
Two ports cannot use the same
address range and interrupt.
Disabled No assignment. The touch screen is disabled and
does not function.
0x3f8 IRQ 4 Use this address range and interrupt.
0x2f8 IRQ 3
0x3e8 IRQ 4
0x2e8 IRQ 3
0x3f8 IRQ 12
0x2f8 IRQ 11
0x3e8 IRQ 12
0x2e8 IRQ 11
Figure 276: Motherboard device configuration - video and flat panel configuration
BIOS setting Meaning Setting options Effect
Graphics memory Setting for the amount of graphics
memory reserved by the main memory. 2-254 Manually setting the value.
Output display Selection of display mode Flat panel Displays on a Power Panel display.
Panel and CRT Displays on an external monitor and Power Panel
display.
Type Displays the Power Panel display type. None -
Table 143: BIOS video configuration menu
BIOS setting Meaning Setting options Effect
Table 142: BIOS super I/O configuration menu (Forts.)
XpressROM Setup
F1/ALT+H:Show Help ESC:Exit ALT+Q:Go to Main Menu ENTER:Select +/-:Choice
Graphics Memory: 008
Output Display:
Flat Panel
Flat Panel Configuration
Type: TFT
Contrast: AUTO
Brightness: AUTO
Graphics Configuration
Select graphics memory size. Use even numbers of MBytes only.