Software • BIOS options
Chapter 4 Software
Panel PC 2100 swing arm user's manual V1.00
99
The default settings are the optimized settings that are applied when selecting the "Load setup defaults" function
on the BIOS Setup "Exit" screen or pressing <F9> on the individual screens (applies the default settings for the
respective screen only).
1.4 BIOS Setup keys
The following keys are enabled during POST:
Information:
Key signals from USB keyboards will only be registered after the USB controller has been initialized.
Keys
Function
F2
Opens the main BIOS Setup screen
F5
Opens the boot menu. This lists all bootable devices that are connected to the system. Selecting a device with cursor ↑,
cursor ↓ and the pressing <ENTER> will boot from that device.
<Pause>
Pauses POST. Pressing any other key resumes POST.
Table 80: BIOS-relevant keys for POST
The following keys can be used once inside BIOS Setup:
Key
Function
F1
Opens general help information
Cursor ↑
Moves to the previous item
Cursor ↓
Moves to the next item
Cursor ←
Moves to the previous item
Cursor →
Moves to the next item
+-
Changes the setting for the selected function
Enter
Changes to the selected screen
Page ↑
Jumps to the first BIOS menu item or object
Page ↓
Jumps to the last BIOS menu item or object
Home
Jumps to the first BIOS menu item or object
End
Jumps to the last BIOS menu item or object
F7
Resets any changes
F9
Loads and configures CMOS default values for all BIOS settings
F10
Saves and exits
ESC
Exits a submenu
Table 81: BIOS-relevant keys
