B&R Industries Panel PC 2100, Руководство пользователя

Страница: 43 / 191

Technical data • Individual components
Chapter 2
Technical data
Panel PC 2100 swing arm user's manual V1.00 43
3.1.2 5AP92D.1906-0x
3.1.2.1 General information
•
19.0" TFT SXGA color display
•
Single-touch (analog resistive)
•
Flexible hanging or standing swing arm installation
•
IP65 protection
3.1.2.2 Order data
Model number Short description Figure
Display units
5AP92D.1906-00 Automation Panel 19.0" SXGA TFT - 1280 x 1024 pixels (5:4)
- Single-touch (analog resistive) - Landscape format - IP65 pro-
tection - For swing arm mounting - Flange on the top
5AP92D.1906-01 Automation Panel 19.0" SXGA TFT - 1280 x 1024 pixels (5:4)
- Single-touch (analog resistive) - Landscape format - IP65 pro-
tection - For swing arm mounting - Flange on the bottom
Table 36: 5AP92D.1906-00, 5AP92D.1906-01 - Order data
3.1.2.3 Technical data
Product ID 5AP92D.1906-00 5AP92D.1906-01
General information
B&R ID code 0xE388 0xE389
Certification
cULus Yes
Display
Type Color TFT
Display size 19.0"
Colors 16.7 million
Resolution SXGA, 1280 × 1024 pixels
Contrast 2000:1
Viewing angles
Horizontal Direction R = 89° / Direction L = 89°
Vertical Direction U = 89° / Direction D = 89°
Backlight
Type LED
Brightness 300 cd/m²
Half-brightness time
1)
50,000 h
Touch screen
2)
Type AMT
Technology Analog, resistive
Controller B&R, serial, 12-bit
Transmittance 81% ±3%
Operating conditions
EN 60529 protection IP65
3)
Mechanical characteristics
Housing
Material Aluminum, painted
Paint White aluminum
Front
Frame Aluminum, painted
Panel overlay
Material Polyester
Dark gray border around display RAL 7024
Flange output Top Bottom
Dimensions
Width 468 mm
Height 386 mm
Weight 9650 g
Table 37: 5AP92D.1906-00, 5AP92D.1906-01 - Technical data
1) At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time.
2) Touch screen drivers for approved operating systems are available in the Downloads section of the B&R website.
3) Only when all covers are installed and the device is properly mounted on a swing arm.