Accessories • Terminal block for the button/switch interface
166
Panel PC 2100 swing arm user's manual V1.00
2 Terminal block for the button/switch interface
2.1 0TB1210.3100
2.1.1 General information
This 2-row, 10-pin TB1208 terminal block is used to connect to the button/switch interface of the Automation Panel
9xD as well as to the interfaces on various interface options.
2.1.2 Order data
Model number
Short description
Figure
Terminal blocks
0TB1210.3100
Connector - Female 10-pin - Cage clamp - Protected against
vibration by the screw flange
Table 140: 0TB1210.3100 - Order data
2.1.3 Technical data
Product ID
0TB1210.3100
General information
Certification
CE
Yes
cULus
Yes
Terminal block
Note
Nominal values according to UL
Number of pins
10 (female)
Type of terminal clamp
PUSH IN cage clamp connector
Cable type
Only copper wires (no aluminum wires!)
Distance between contacts
3.5 mm
Connection cross section
AWG wire
26 to 16 AWG
Wire end sleeves with plastic covering
0.14 to 1 mm²
Solid wires
0.14 to 1.5 mm²
Fine strand wires
0.14 to 1.5 mm²
With wire end sleeves
0.14 to 1.5 mm²
Electrical characteristics
Nominal voltage
300 V
Nominal current
1)
10 A
Table 141: 0TB1210.3100 - Technical data
1)
The limit data for each I/O module must be taken into consideration.
