Technical data • Introduction
Chapter 2
Technical data
Panel PC 2100 swing arm user's manual V1.00
15
Chapter 2 • Technical data
1 Introduction
1.1 About this user's manual
This user's manual contains all relevant information about an operational Panel PC 2100 swing arm device.
1.2 Description of individual modules
1.2.1 Display units
Display units are the basis for every Automation Panel 9xD and Panel PC 2100 swing arm device. They consist of
a display, touch screen and housing. A variety of display sizes, touch screen technologies, flange connections (top
or bottom) and displays with keys are available. These display units can be operated exclusively as a complete
system together with a link module (Automation Panel 9xD) or CPU board and system unit (Panel PC 2100 swing
arm device).
Single-touch display units start at model number 5AP92D.xxxx-xx, multi-touch display units start at 5AP93D.xxxx-
xx and multi-touch display units with keys start at 5AP99D.xxxx-xx.
1.2.2 System units
System units consist of a CPU board and aluminum housing. They include all of the interfaces and main memory
on PPC2100 swing arm devices in addition to interface option and CFast card connections. Main memory is per-
manently built into the system unit and cannot be replaced.
An operational Panel PC is put together by installing a system unit on a display unit. The Panel PC 2100 is mounted
on a swing arm system using the integrated flange.
A system unit cannot function without a display unit.
