Using Web-based Management
53
1. In the text box next to
, enter the IP address or URL that you
want to ping, and then select its corresponding internet protocol by
clicking either the IPv4 or IPv6 radial button.
2.
In the text box of “Packet Size”, enter
the desired value (default packet
size is 56).
3.
In the text box of “Number of Pings”, enter the
number of times you
wish to ping (default value is 5).
4. Click
to begin the connection status check. „Ping‟ messages
will appear below.
Traceroute
This feature allows you to check the performance of a connection.
1. In the text box next to
, enter the IP address or URL that you
want to trace route, and then click
to start the performance
text. „Traceroute‟ messages will appear below.
NS Lookup
This feature allows you to retrieve name server information.
1. In the text box next to
, enter the IP address or URL that you
want to trace route, and then click
to get name server
information. „Nslookup‟ messages will appear below.
