13259 0303
9
FRONT PANEL
1. Headphone Jack
- Stereo headphones having a standard ¼ inch binaural plug can be connected to the
headphone output. The receiver must be on and in HEADPHONE Mode for proper headphone operation.
2. Front panel buttons
3. Main power switch
- Removes all power to the receiver. Normal operation of the receiver requires the power
switch to remain on. Use the Sleep button for daily on and off of the receiver. It places the unit in standby mode
that allows turning back on with the remote control. Turn the receiver off with the main power switch when not
using the receiver for an extended period of time.
4. Volume control
- For controlling system volume. Turning the jog-shuttle type volume control clockwise
increases the volume level, counterclockwise decreases the volume level. The volume knob is also used to
change other processor settings. See THE MENU SYSTEM and OPERATION
SLEEP
PRESET
ENTER
M ENU
DO W N
UP
SO URCE
M O DE
SAVE
Puts the receiv er in standby (low power) m ode.
Steps through audio / v ideo presets for instant recall of setups.
Pressing ENTER recalls the preset.
Confirm selection or display current status of the receiv er.
Enter / exit m enu system .
Step through m enus, sources, or audio m odes.
Steps through the audio / v ideo sources.
Steps through the audio m odes.
Pressing SAVE followed by ENTER sav es a fav orite preset.