8
RS-232 Communication
Plug one end of a RJ-45 terminated straight through CAT-5 cable into the serial communications port on the
back of the computer using the serial DB-9 to RJ-45 Adapter. Plug the other end of the RJ-45 terminated cable
into the RS-232 I/O port on the Receiver. Once your COM settings are determined, configure the B&K Suite and
B & K Editors for simple and easy setup. Note that many modern laptops do not come equipped with a DB-9
style serial port. If your computer only has a USB style serial port, you'll need to obtain a USB to DB-9 Serial
port adapter cable.
B & K offers a pre-made connector suitable for connecting a serial port to a standard network CAT-5 cable with
RJ-45 connectors. However, if you wish to make your own, please contact B&K Components for the pin connection.
To Network
To Computer
Shown is a net-
work router which
would assign an IP
address
to
the
B&K.
Ethernet Communication
Typically a router would be used in a situation for Ethernet communication. This is because a router would
assign an IP address to the B&K unit. Only in advanced situations would a static IP address would be used.
Connection Instructions
1. Make sure that all devices are powered off, including the B&K, Router, PCs, switches, etc.
2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router.
Connect the other end to the Ethernet port on the B&K. Repeat this step to connect more PCs or other network
devices to the Router. Power the router as needed.
3. Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port. Power on the cable or DSL
modem, B&K product, router, etc.
4. Power on your PC(s). Open the necessary B&K programs and either configure or control the AVR 707.
Note: Please see the full AVR 707 manual for further information.
There are a few different ways to achieve control and configuration of the AVR 707. Using the compo-
nent video or HDMI output on the AVR 707 you may use the on-screen GUI navigation while viewing
changes on the HD monitor. BKC-DIP communication support is available for use with Ethernet and
RS-232 from and external controller or device or a PC. Some restrictions may apply. Please see the
full manual or the B&K website for further information.
GUI On-Screen Overlay Interface
To program the unit using the on-screen menu system use the component video or HDMI output to
your High Definition television or monitor.
Note: The menu output is 720p, 1080i, 1080p ONLY.
The
front panel display or SR 10.1 remote may be used to navigate the menu system. For specific menu
structure examples please see the full AVR 707 manual.
CONFIGURATION AND CONTROL
All manuals and user guides at all-guides.com
