manualshive.com logo in svg

B&G Zeus3S, Руководство оператора, Страница: 130 / 140

Поделиться
Скачать
B&G Zeus3S Скачать руководство пользователя страница 130

Service report

The system has a built-in service assistant that creates a report about the unit. The service
report is used to assist in technical support enquiries.
It can also include information about devices connected to the network(s).
The report includes the software version, serial number, and information from the settings
file.
If you call technical support before creating the report, you can enter an incident number to
assist with tracking. You can attach screenshots and log files to the report.

Ú

Note: 

There is a 20MB limit for the report attachments.

The report can be saved to a storage device and emailed to support.
You can also upload it directly if you have an internet connection.

Backing up your system data

It is recommended to regularly copy user data and your system settings database as part of
your back-up routine.

Waypoints

The waypoints option in the storage dialog allows for managing user data.

130

Maintenance

| Zeus³S Operation Manual

Содержание Zeus3S













































































































































Отзывы:

Нет отзывов