manualshive.com logo in svg

B&G Zeus3 Glass Helm, Руководство оператора

Поделиться
Скачать
B&G Zeus3 Glass Helm Скачать руководство пользователя страница 79

Course up

Rotates the radar image to display the current navigation course directly up.
This option works only when the system is navigating an active route. If you are not
navigating an active route, the heading up orientation is used until the navigation function is
started.

Positioning the radar center

You can move the radar PPI (Plan Position Indicator) center to different positions within the
radar panel, and select how your vessel symbol moves on the radar image.
Radar motion is indicated on the upper left corner of the radar panel as either TM (True
motion) or RM (Relative motion).
The radar position can only be changed when the radar is transmitting.

Center

Look ahead

Custom offset

Center

Default setting. The radar PPI center is centered on the radar panel.

Look Ahead

Moves the radar PPI center to the bottom of the panel to maximize the view ahead.

Offset

Allows you to move the PPI center to any location on the radar panel.

1.

Select the offset option from the menu

2.

Move the cursor to where you want to position the radar center

3.

Confirm the setting by selecting the 

Save offset

 button in the bottom right corner of the

panel.

True motion

In True motion, your vessel and moving targets move across the Radar screen as you travel.
All stationary objects remain in a fixed position. When the vessel’s symbol reaches the edge
of the screen, the radar image is redrawn with the vessel symbol repositioned in the center of
the screen.
When True motion is selected, the menu expands to include a reset true motion option. This
allows for manually resetting the radar image and vessel symbol to the center of the screen.

EBL/VRM markers

The electronic bearing line (EBL) and variable range marker (VRM) allows quick
measurements of range and bearing to vessels and landmasses within radar range. Two
different EBL/VRMs can be placed on the radar image.
The EBL/VRMs are by default positioned from the center of the vessel. It is, however, possible
to offset the reference point to any selected position on the radar image.
When positioned, you can turn the EBL/VRM on/off by selecting the relevant markers on the
data bar, or by deselecting the marker from the menu.

Defining an EBL/VRM marker

1.

Ensure that the cursor is not active

2.

Activate the menu, select 

EBL/VRM

, then select 

EBL/VRM 1

 or 

EBL/VRM 2

- The EBL/VRM is now positioned on the radar image

3.

Select the adjustment option from the menu if you need to reposition the marker, then
adjust the marker by dragging it into position on the radar image

Radar

| Zeus3 Operator Manual

79

Содержание Zeus3 Glass Helm













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды