B&G Zeus2 series, Руководство оператора

Страница: 97 / 126

AIS vessel lost
Sets the range for lost vessels. If a vessel is lost within the set range, an alarm occurs.
Ú
Note:
The check box controls whether the alarm pop-up box is displayed and if the siren
goes on. The CPA and TCPA define when a vessel is dangerous regardless of the enabled or
disabled state.
Vessel message
Controls whether an alarm will be activated when a message is received from an AIS target.
Vessel settings
Your vessel’s MMSI number
You need to have your own MMSI (Maritime Mobile Service Identity) number entered in the
system to receive addressed messages from AIS and DSC vessels.
It is also important to have the MMSI number entered to avoid seeing your own vessel as an
AIS target on the chart.
Ú
Note:
The Vessel message option in the alarm settings must be toggled on for any MMSI
message to be displayed.
Icon filters
By default, all targets are shown on the panel if an AIS device is connected to the system.
You can select not to show any targets, or to filter the icons based on security settings,
distance, and vessel speed.
Extension lines
The length of the extension lines for your vessel and for other vessels can be set by the user.
• A: Heading
• B: Course Over Ground (COG)
The length of the extension lines is either set as a fixed distance, or to indicate the distance
the vessel will move in the selected time period. If no options are turned on for
This vessel
then no extension lines are shown for your vessel.
AIS | Zeus2 Operator Manual
97