B&G Zeus Touch, Руководство по установке

Страница: 50 / 66

50 |
CZone connection to NMEA 2000 | Zeus Touch installation manual
CZone setup
In order to communicate with the CZone modules connected to the network, the Zeus Touch
display must be assigned a unique CZone Display Dipswitch setting.
The functionality of the CZone system is determined by the CZone Confi g File (.zcf ), which is
stored on all CZone modules, and supported B&G displays such as the Zeus Touch. The fi le is
created using the CZone Confi guration Tool, a specialised PC application available from BEP
Marine Ltd, and associated CZone distributors.
The Zeus Touch system provides a means to load the Confi g fi le, as well as apply updates to
module fi rmware, removing the need to take a laptop computer aboard the vessel.
Enabling CZone functionality
Once CZone is enabled, an addtional CZone menu icon appears on the Settings page.
Assigning the dipswitch setting
Every B&G product capable of controlling and viewing CZone devices must be assigned a
virtual dipswitch setting. This setting is unique for each device. On the Zeus Touch this can
be set in the CZone menu on the Settings page. Typically it is set after the confi g fi le already
exists on the CZone system, but it may also be set in advance.
When the confi g is already available on the network, it will immediately commence upload-
ing to the Zeus Touch once the dipswitch is set. Allow this to complete, without interruption.
Setting CZone to display at startup
With this option selected, the CZone control page will be shown fi rst, every time the Zeus
Touch is powered up.
CZone backlight control
Enabling this will cause the Zeus Touch to synchronize it’s backlight setting with that of any
CZone Display Interfaces set up to share backlight settings.
Import and backup a confi g fi le
The fi les page may be used to import CZone confi g fi les, or export a copy to a Micro SD
card. Importing will overwright the existing fi le on the Zeus Touch and all connected CZone
devices.
For further information refer to ‘“Applying Software Updates” on page 51
Upgrading module fi rmware
The fi les page also allows the loading of CZone module fi rmware updates. For further infor-
mation refer to ‘“Applying Software Updates” on page 51