Speakers
HPL
Coaxials HF Compression drivers Horns
Specifications
Nominal Diameter
380 mm (15 in)
Nominal Impedance
8
Ω
Minumum Impedance
6.2
Ω
Power Handling
(50 –500 Hz)
Nominal
1
400 W
Continuous Program
2
800 W
Sensitivity (1W/1m)
3
99 dB
Frequency Range
40-2000 Hz
Voice Coil Diameter
76 mm (3 in)
Winding Material
Copper
Former Material
Glass Fibre
Winding Depth
16 mm (5/8 in)
Magnetic Gap Depth
9 mm (11/32 in)
Flux Density
1.2 T
Also available in 4
Ω
, data upon request
Thiele & Small Parameters
4
Fs
39 Hz
Re
5.1
Ω
Qes
0.23
Qms
8.7
Qts
0.22
Vas
211 dm
3
(7.4 ft
3
)
Sd
855 cm
2
(132.5 in
2
)
η
0
5.3%
X max
± 4 mm
X var
± 4 mm
Mms
79 g
Bl
20.6 T·m
Le
2 mH
Mounting and Shipping Information
Overall Diameter
394 mm (15.5 in)
Bolt Circle Diameter
374 mm (14.6 in)
Baffle Cutout Diameter
355 mm (13.9 in)
Depth
163 mm (6.4 in)
Flange and Gasket Thickness
16 mm (5/8 in)
Net Weight
8.9 kg (19.6 lb)
Shipping Weight
9.6 kg (22.4 lb)
Shipping Box
450x450x200 mm
(17.7x17.7x8 in)
1
2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
4
Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
15 PL 40
|
Woofer
High efficiency 15" woofer using a 3" copper voice coil that
allows a high power handling (800W). Very good LF performance
in compact bass-reflex enclosures, flat frequency response, the
15 PL 40 represents an optimal choice for a two-way system.
Can be used with success also in horn loaded enclosures.
