DE800
HF Drivers
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
220 W continuous program power capacity
1.4” horn throat diameter
75 mm (3 in) aluminium voice coil
Composite Polyimide/Titanium diaphragm
500 – 18000 Hz response
108 dB sensitivity
Neodymium magnet assembly with shorting copper cap
Specifications
Throat Diameter (1)
36 mm (1.4 in)
Nominal Impedance (2)
8 ohm
Minimum Impedance
8.6 ohm
Nominal Power Handling (3)
110 W
Continuous Power Handling (4)
220 W
Sensitivity (1W/1m) (5)
108 dB
Frequency Range
0.5 -18 kHz
Recommended Crossover (6)
1.2 kHz
Voice Coil Diameter
75 mm (3 in)
Winding Material
Aluminium
Inductance
0.14 mH
Diaphragm Material
Composite
Polyimide/Titanium
Flux Density
1.85 T
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter
124 mm (4.9 in)
Depth
56 mm (2.2 in)
Net Weight (1 unit)
2.3 kg (5.1 lb)
Shipping Weight (4 units)
9.8 kg (21.5 lb)
Shipping Box (4 units)
300x160x180 mm
(11.8x6.3x7.1 in)
1
Driver mounted on B&C ME90 horn
2
Also available in 16 ohms, data upon request
3
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
4
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6
12 dB/oct. or higher slope high-pass filter.
