9
User Manual
IT8000 3/8” TIE
-LOK DATA TOOL
IT7000 1/4” TIE
-LOK DATA TOOL
ITC800 CONTROL SYSTEM
Document # P80080 Rev. C.3
© Copyright
BAND-IT-IDEX, Inc. 2024
All rights reserved
All rights reserved
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
ENVIRONMENT
TRANSPORTATION, STORAGE, HANDLING
Table 1
Transportation
Avoid shocks and vibration
Immediately check units for transport damage
and inform your transport company, if necessary
If possible, ship in original packaging
Storage
Store unit in a clean, dry place with air
temperature between -25°C and +55°C (-13°F to
131°F)
Handling
Use techniques appropriate for lifting and moving
heavy objects.
Normal operating conditions are defined as:
Intended for Indoor Use ONLY at an automotive assembly plant or similar facility.
Temperature range from 5°C to 40°C (41°F to 95°F).
Max relative humidity 80% for temperatures up to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F).
Conforms to Applicable RATED POLLUTION DEGREE 1.
Correct illumination for safety of operator (ISO 8995-89).
Avoid using the tool near equipment with strong EMI / RFI emission.
Avoid using the tool near equipment susceptible to EMI / RFI interference.
This tool has been tested for:
Altitude: Sea level to 5690 ft (1730 m)
Atmospheric pressure: 14.7 lbs/in
2
(1 Kg/cm
2
) to 12 lbs/in
2
(0.85 Kg/cm
2
)
Return tool to Band-It at end of life for proper recycling/disposal.
Tool size:
Tool only: 12
” L
x 6.5
” W x
8
” H (
305 x 165 x 203 mm)
Controller box: 20
” x
20
” x
10” (
508 x 508 x 254 mm)
Tool weight: 10 lbs (4.5 kg)
Tool Clearance: Recommended 3ft (1m) for operator maneuverability during use.
Controller weight: 63 lbs (28.6 kg)
Controller Clearance: Recommended 3ft (1m) to allow access for maintenance