background image

6

Declaration of conformity

(must be filled by the installer)

DECLARATION OF CONFORMITY “A”

The undersigned

 

Name: ........................................................................................................
Surname:.....................................................................................................

responsible of the installation of the system declare that the product:

Gate type: ................................................................
Address:   ........................................................................... 
                   ...........................................................................

satisfies all the technical regulations applicable to the product within
the scope of Council Directives 73/23/EEC, 89/336/EEC, 98/37/EEC
and subsequent modifications.

Furthermore declare that the following standard specifications have been
applied:

    EN12453/EN12445 Safety for motorised doors and gates, industrial,
    commercial and residential - Requisites and classification - Test methods

    EN12604/EN12605 Mechanical aspects for doors and gates, industrial,
    commercial and residential – Requisites and classification – Test methods

    CEI 64/8 electrical plant with nominal tension not over 1000 VAC and
    1500 VDC

Notes: ...................................................................................................
          ...................................................................................................
          ...................................................................................................
Place:..................................................................................................
          ...................................................................................................
Date: ...................................................................................................

Signature:........................................ 

Содержание KUDU 230 V













Отзывы: