www.balzar.se
Unite
Required tools: hex key, crosshead
screwdriver, adjustable spanner.
COMPOnentS
Carefully slide the foot into the inner
leg.
Attach the mounting plate using a hex
key and 3 x Countersunk screw. the
small part sticking out on the outer leg
matches with a hole in the Plate.
Carefully slide the upper leg into the
inner leg. The upper foot fits into the
lower foot.
Slide the outer leg over the inner leg.
Secure using an adjustable spanner
and 1 x Bolt + 1 x Washer. tighten the
bolt so there is no movement in the
foot!
Much force is needed!
Put the tabletop on a protective
cover and attach it to the base using a
crosshead screwdriver and 4 x Screw.
Unite - XL4
Unite - L4
Unite M4
Unite S4
1
4
2
3
5
ASSEMBLY INSTRUCTIONS
Attach the 4 adjustable feet (A) OR the
4 gliders (B) and gently turn the table
upside down.
A
6
1 x
tabletop
1 x
Outer leg
4 x Glider
(only for S4)
1 x
inner leg
1 x
Lower foot
1 x
Bolt
4 x
Screw
4 x
Adjustable feet
M6 -> S4, M4
M8 -> L4, XL4
3 x
Countersunk
screw
1 x
Upper foot
1 x
Plate
1 x
Washer
B
2017-04-24