3
BLT-27502
Assembly Diagram
To Assemble:
I
dentify and Separate all the Parts and Hardware.
Illustration # 1
Place the Left Side Panel (P-1) and the
Right Side Panel (P-2) with the Predrilled
holes facing up and install 2 Cam Locks
(F) into the large holes in each Panel as
shown in illustration # 1.
F
Be sure that arrow on
top of Camlock (F)
aligns with centerline of
Edge Drilled hole.
Phillips
Screwdriver
Centerline of Edge
Drilled hole.
Arrow
G
P-1
P-4
A4
1.
2.
3.
4.
Tools required:
Phillips Head Screwdriver
Place the Top Panel (P-4) with the Holes facing up. Attach 1 Magnetic
Door Catch (C) to the Top Panel (P-4) using 4 each Wood Screws
(A4) as shown in illustration # 2.
Install 4 each Cam Posts (G) in the 4 threaded insert nuts
(Pre-installed) as shown in illustration # 2.
Install 4 each Wood Dowels (J) into the drilled holes
as shown in illustration # 2.
Illustration # 2
(Left Side Panel Shown)
(F) CamLock
For Scale only
(A4) Screw #4 X 5/8”
For Scale only
(J) Wood Dowel
For Scale only
F
C
G
J
(G)Cam Post
For Scale only
5.
