ARS-5
QUICK START GUIDE
1. Ground Input
2. Power Input
3. Ignition Input
4. Field Output
5. Bat. Temp.(+)
6. Bat. Temp.(-)
7. Stator In
8. Tach. Out
9. Alt. Temp. (+)
10. Alt. Temp. (-)
11. Dash Lamp
MC-ARS-5
Installation &
Operation Manual
www.balmar.net / Customer Service: +1 (360) 435-6100 x 1 / Technical S1 (360) 435-6100 x 3
SUP-0242 REVA
Positive Battery Sense
(Required for Internal Regulator Only)
Ignition
9
10
11
7
6
5
8
External Regulator
Plug
Isolated Ground Terminal
MUST be connected to system ground
Positive Output
Terminal
HOUSE BATTERY
BANK
D+
1
2
3
4
+
10A
Connector 1
Connector 2
The wire diagram above shows a typical set-up for a
6-Series alternator to a ARS-5 regulator. Connector 1
is for use with the internal regulator which connects to
a Yanmar engine harness. Connector 2 is used with
the ARS-5 or MC-614 (as shown).
Alternators other than the 6-Series have similar, but
slightly different connections. If programming for
specific battery type, 12.5 volts on the battery are
necessary. Please refer to the Alternator Installation
Guide for specific connections.
FLIP OVER FOR MORE INFORMATION
