Chapter 4: Periodic Maintenance
CineVision™ Installation and Maintenance
4 - 12
MK2A-CINEV-0001 [B]
Periodic Maintenance Schedule
C
o
p
yrigh
t
2006 B
al
ly G
amin
g, I
n
c. Al
l Ri
gh
ts
R
es
er
ved.
Printer
Use the following instructions to maintain the printer components:
EPROM or EEPROM (Flash Upgrade)
Verify the firmware, EPROM or EEPROM (flash upgrade) version is correct and is the latest revision.
Replace, if necessary.
Ribbon (Impact)
Frayed and worn ribbons can damage the print head by snagging and bending the pins. Replace worn
ribbons.
Print Head
After opening the unit, the ticket path is accessible for cleaning or clearing tickets. Use a soft brush to
clean the paper dust from inside the printer and chassis area. Also remove the paper dust from the sensor
optics. If streaking on the printed ticket is evident, the thermal print head may need cleaning.
Cleaning cards are available for thermal printers through TransAct Technologies Incorporated or can be
purchased direct from Enefco International Ltd. at (888) 578-0141.
