CineVision™ Installation and Maintenance
Chapter 4: Periodic Maintenance
Periodic Maintenance Schedule
MK2A-CINEV-0001 [B]
4 - 11
C
o
p
yrigh
t
2006 B
al
ly G
amin
g, I
n
c. Al
l Ri
gh
ts
R
es
er
ved.
CD-ROM Drive
Use the following instructions to maintain the CD-ROM drive components:
Lens
The CD-ROM Drive reads data with a laser. Dust, smoke, and airborne particles can cloud the lens that
the laser is focused through, causing “freezing” and other machine malfunctions.
A commercial lens cleaner can help maintain optimum performance from the 5 and ½ inch optical disc
drive. The cleaner is a disc with a small lab-grade brush installed on the underside that gently cleans the
delicate lens. This special brush is made with ultra-fine synthetic fibers that are infused with a
microscopic strand of copper giving the cleaner antistatic properties.
CD-ROM
Contamination on the CD-ROM can cause read errors similar to those of a dirty drive. A slow flashing
busy LED may indicate a dirty CD. Clean the CD-ROM with a soft damp cloth. Avoid using a circular
motion while cleaning. The disc should be wiped in a radial (inner side outward) direction.
