Balluff mvHYPERION Series, Техническое руководство

Страница: 63 / 94

1.14 Use Cases 59
Figure 5: wxPropView - Selecting modes
Note
With the property "Divider" you can set if every signal (or every second, third etc.) from the rotary encoder is
used.
1.14.1.3.6 int Reset() With this function you can reset the counter, which is saved in InhibitBackwardUntil
← -
LastPos (p. 58 ).
1.14.1.4 Working with a Basler Sprint line scan color camera
1.14.1.4.1 Introduction Basler's Sprint line scan color camera uses a two line sensor with a Bayer Mosaic filter
mask. To use the demosaic algorithm correctly, you have to set the
• BayerParity .
There are 4 possibilities for the BayerParity:
• "Red-green"
• "Green-red"
• "Blue-green"
• "Green-blue"
MATRIX VISION GmbH