Balluff MATRIX VISION GiGE VISION BVS CA-GX0-XAS2..., Руководство пользователя

Страница: 74 / 94

4 FIRST STEPS
26
www. matrix-vision.com
BVS CA - GX0 - _ _ _ _ _ _ - _ _ _ _ _ _ - XAS2
www.matrix-vision.com
Four simple steps are required to initially start up and configure the BVS Industrial Cam-
era . Besides the BVS Industrial Camera , the following is required:
•
Latest BVS Industrial Camera driver
•
Power I/O cable
•
12
…24 V power supply
•
LAN cable
•
PC with BVS Cockpit
4.1 Step 1: Installing the latest BVS Industrial Camera driver
Download the latest driver from the product download section, unzip it and execute the
setup program for 32 bit (
x86 ) or 64 bit ( x86_64 ) Windows systems.
Beside the BVS Industrial Camera driver, four additional tools will be installed:
•
wxPropView - an interactive GUI tool to acquire images, to configure the device
and to display and modify the BVS Industrial Camera properties
•
mvDeviceConfigure - an interactive GUI tool to configure the BVS Industrial Cam-
era .
It is possible e.g.
o
to check, if the camera is accessible and
o
to update firmware.
•
mvGigEConfigure - an interactive GUI tool to install the GigE capture filter which
adds a service to your Gigabit Ethernet interface
•
mvIPConfigure - an interactive GUI tool to configure the network behavior of the
BVS Industrial Camera
It is possible e.g.
o
to assign a user defined name,
o
to change the IP address behavior, and
o
to find and fix misconfigured (e.g. wrong IP address) BVS Industrial Cam-
eras .
The user can select, if the device should
o
use a persistent IP address or
o
use DHCP to obtain an IP address.