BSG TID-05-T30-01-005
6
4
The Easy Tool-ID System
4.2. Technical Data and Components
The Easy Tool-ID system is a special tool stand with the following integrated components:
•
Microcontroller (BSG TID-05-H01-04-005)
•
Read/write head (BIS C-306-PU1-01 or BIS M-302-001-S115)
•
Processor unit (TM-BIS C-600 Easy Tool or TM-BIS M-6000 Easy Tool)
•
Power supply (BAE PS-XA-1W-24-038-601)
•
Various connection cables
The stand can be secured to the ground via the mounting holes.
The power is supplied via the power supply unit integrated into the stand. For information
needed to make the connection, please refer to the corresponding user's guide located at
Caution
Proper connection of the power supply must be carried out by specialist personnel.
Balluff shall assume no liability for improper use. It must be ensured that the
system is connected to ground.
Figure 4: Components
