Balluff BVS HS-Q Series, Руководство по эксплуатации

Страница: 82 / 296

82
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Aiming Duration Timer
Specifies the frame of time the aiming pointer remains on after decoding a label, when in trigger
single mode.The range for this setting is from 1 to 255 seconds in 1-second increments. See
page 246 in “References” for a description of this feature.
Aiming Off After Decoding
Set Aiming Duration Timer
To configure, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the
barcode at left followed by the digits from the
Alphanumeric characters in
Appendix 18,
Use the barcodes in this appendix to enter
numbers as you would select digits/charac-
ters from a keypad.
representing your
desired character(s). End by reading the
ENTER/EXIT barcode.
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
CANCEL
DEFAULT
LSTM00
LSTM
~