www.balluff.com
11
5
Selecting the Interface Type
BVS HS-PC
Industrial Corded Handheld Barcode Reader
5
Selecting the Interface Type
Upon completing the physical connection between the reader and its
host, proceed directly to Interface Selection below for information and
programming for the interface type the reader is connected to (for
example: RS-232, USB, etc.) and scan the appropriate barcode to
select your system’s correct interface type.
5.1
Interface Selection
All models are multi-interface and support RS-232 and USB.
Information and programming options for each interface type are pro-
vided in this section. For defaults and addi- tional information associ-
ated with each interface, proceed to the corresponding chapter in the
BVS HS-P series operation manual (OPM).
5.1.1
Configuring the Interface
Scan the appropriate programming barcode to selects the interface
type for your system.
NOTE
Unlike some other programming features and
options, interface selections require that you scan
only one programming barcode label. DO NOT
scan an ENTER/EXIT barcode prior to scanning an
interface selection barcode.
Some interfaces require the scanner to start in the
disabled state when powered up. If additional scan-
ner configuration is desired while in this state, pull
the trigger and hold for 5 seconds. The scanner will
change to a state that allows programming with
barcodes.
