Balluff BTL7-V50T-M C003 Series, Руководство пользователя

Страница: 31 / 102

www.balluff.com 9 english
3
Construction and function (continued)
3.3 LED display
Fig. 3-3: BTL7 LED displays
LED 4
(Link/Activity
OUT)
LED 3
(Link/Activity
IN)
LED 1
(BTL status)
LED 2
(PROFINET
status)
3.3.1 LED 1: BTL status
LED 1 Operating state
Green Normal function
Magnet is within the limits.
Red Error
No magnet or magnet outside the limits.
Tab. 3-1: LED 1
3.3.2 LED 2: PROFINET status (dual LED)
LED 2
Red
(Bus Failure)
Green Meaning Cause
Off Off No supply voltage
On On No bus connection with other
participants (no link) Bus not connected
Master cannot be accessed or is switched off
Flashing
1) On Bus connection (link) available, but
the sensor is not involved in cyclic
data exchange. Sensor is starting up, but parameterization has not yet been
completed.
Sensor has been incorrectly configured.
The sensor was assigned an incorrect station address and is thus
not accessible.
The desired configuration is not the same as the sensor
configuration.
Off On The sensor is involved in cyclic data
exchange.
Tab. 3-2: LED 2
3.3.3 LED 3 / LED 4: Link/Activity
LED 3/LED 4
Green
Status Connection
On Port open Yes
Flashing Requested by the master
to identify the device Yes
Off Port closed No
Tab. 3-3: LED 3 and LED 4
BTL7-V50T-M _ _ _ _ -A/B/Y/Z(8)-C003
Magnetostrictive Linear Position Sensor – Rod Style