Balluff BTL7-A/E501-M Series, Руководство пользователя

Страница: 57 / 194

www.balluff.com 23 english
9
Adjust with the calibration device (continued)
Displayed values (example)
At 0…10 V At 4...20 mA
Set end point
►
Bring magnet to the new end point.
9.89 V 19.13 mA
►
Hold down
‚ ‚
for at least 2 s.
> 2 s
2
⇒ The new end point is set with the last
valid end value.
10.00 V 20.00 mA
Adjust end value
►
The end value can be changed using
Œ Œ
and
‚ ‚
1)
. The
gradient of the curve changes
(see page 20).
10.00 V 20.00 mA
8.00 V 16.80 mA
►
End calibration procedure: Briefly press
Œ Œ
and
‚ ‚
simultaneously (< 1 s).
⇒ Set position value is saved.
< 1 s 1 2
8.00 V 16.80 mA
End adjustment
►
Briefly press
Œ Œ
and
‚ ‚
simultaneously (< 1 s).
< 1 s
1 2
⇒ The current position value is displayed once the
buttons are released.
Any of the individual steps for settings can be
selected. The adjustment process can be
ended at any time.
1
2
1
2
1 = blue button
2
= gray button
BTL7-A/E501-M_ _ _ _-J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
Type of protection “db” and “ta”
Flameproof enclosure