Balluff BTL304K, Руководство пользователя

Страница: 38 / 114

14 english
6.1 Value table for factory setting
Output gradient BTL Unit Min. value Null value End value Max. value Error value
Rising BTL7-C… mA 0 0 20.0 20.4 20.4
BTL7-E… mA 3.2 4.0 20.0 20.4 20.4
Falling BTL7-C… mA 20.4 20.0 0 0 0
BTL7-E… mA 20.4 20.0 4.0 3.2 3.2
Tab. 6-1: Value table for factory settings
NOTICE
Interference in function
Configuration with the BTL7 Configuration Tool while the
system is running may result in malfunctions.
►
Stop the system before configuration.
6.2 BTL7 Configuration Tool
The BTL can be quickly and easily configured on the PC
using the PC software BTL7 Configuration Tool.
The most important features include:
– Online display of the current position of the magnet
– Graphical support for setting the functions and curves
– Display of information on the connected BTL
– Selectable number formats and units for display
– Resetting to factory settings is possible
– Demo mode without a connected BTL
The PC software and associated manual can be
found in the Internet under www.balluff.com .
6
Configuration with the BTL7 Configuration Tool
6.3 Connecting the USB communication box
Beim BTL mit Steckverbinder muss die
Kommunikationsbox zwischen BTL und Steuerung
eingeschleift werden. The communication box is
connected to the PC via a USB cable.
Fig. 6-1:
USB cable
6-pin 8-pin
Connection cable approx.
0.3 m with S32 (female)
connector
Connection cable
approx. 0.3 m with
S32 (male) connector
Controller
Connecting the communication box with a connector
Beim BTL mit Kabelverbindung werden die
Kommunikationsleitungen La, Lb und GND mit der USB-
Kommunikationsbox verbunden.
Fig. 6-2:
Controller
USB cable
8-pin
Connection cable
approx. 0.6 m with
luster terminal
Connecting the communication box with a cable connection
When reading or writing data via the
Configuration Tool, LED 2 flashes green.
BTL7-C/E5_ _-M _ _ _ _ -P-S32/KA _ _
Magnetostrictive Linear Position Sensor – Profile Style