Balluff BOS 08E-PI-KH22 Series, Руководство пользователя

Страница: 5 / 20

Optoelektronische Sensoren
Rotlicht Lichttaster BOS 08E-PI-KH22-... mit Hintergrundausblendung und IO-Link
Servicedaten
5
System Kommandos
Index
(dez)
Daten-
format
Zugriff Wertebereich Bemerkungen
0x0002 (2) System-
Command
UINT8 W 0x01 = ParamUploadStart Blockpa-
rameteri-
zation
Start Blockparameterization Device
→
Master
0x02 = ParamUploadEnd Stopp Blockparameterization Device
→
Master
0x03 = ParamDownloadStart Start Blockparameterization Master
→
Device
0x04 = ParamDownloadEnd Stopp Blockparameterization Master → Device
0x05 = ParamDownloadStore Stopp Blockparameterization Master
→
Device
and Upload Request
0x06 = ParamBreak Abort Blockparameterization
0x40 = Teach Apply Teach
Channel
Calculate and apply SP1,2 from
Teachpoint(s)
0x41 = SP1 Single Value Teach Determine Teachpoint 1 for SP1
0x42 = SP2 Single Value Teach Determine Teachpoint 1 for SP2
0x43 = SP1 Two Value Teach TP1 Determine Teachpoint 1 for SP1
0x44 = SP1 Two Value Teach TP2 Determine Teachpoint 2 for SP1
0x45 = SP2 Two Value Teach TP1 Determine Teachpoint 1 for SP2
0x46 = SP2 Two Value Teach TP2 Determine Teachpoint 2 for SP2
0x47 = SP1 Dynamic Teach Start *Start dynamic teach-in for SP1
0x48 = SP1 Dynamic Teach Stop Stop dynamic teach-in for SP1
0x49 = SP2 Dynamic Teach Start Start dynamic teach-in for SP2
0x4A = SP2 Dynamic Teach Stop *Stop Dynamic teach-in for SP2
0x4F = Teach Cancel Abort Teach-in sequence
0x4B = SP1 Fine Adjust Near Decrement SP1
0x4C = SP1 Fine Adjust Far Increment SP1
0x4D = SP2 Fine Adjust Near Decrement SP2
0x4E = SP2 Fine Adjust Far Increment SP2
0x80 = Device reset Reset Reset Device
0x82 = Restore factory settings Restore factory settings
0xA0=Sensor sleep BALLUFF
specific
Sender LED OFF
0xA1=Sensor wake-up Sender LED ON
0xA2=Restore BDC Restore factory settings of BDC1
* These commands shall be applied for the determination of both Setpoints SP1 and SP2 in one single teach-in procedure