Balluff BNI PNT-565-W01-K079 Скачать руководство пользователя страница 21

www.balluff.com

5

english

1.1 

Validity

This guide provides all the information required for safe use 

of the Profinet IO-Link Wireless Master.
It applies to the following models:
– 

BNI PNT-565-W01-K079 

Order code: BNI00FE

Read this guide and the other applicable documents 

completely before installing and operating the product.

Original User’s Guide

This guide was created in German. Other language 

versions are translations of this guide.
© Copyright 2021, Balluff GmbH

All content is protected by copyright. All rights reserved, 

including the right to reproduce, publish, edit and translate 

this document.

1.2 

Other applicable documents

Additional information about this product can be found at 

www.balluff.com

 on the product page, e.g. in the 

following documents:
–  Data sheet

–  Declaration of Conformity

–  Disposal

1.3 

Symbols and conventions

Individual action

 instructions

 are indicated by a preceding 

triangle.

 

Instruction 1

Action sequences 

are numbered consecutively:

1. 

Instruction 1

2. 

Instruction 2

Numbers

 unless otherwise indicated are decimals 

(e.g. 23). Hexadecimal numbers are represented with a 

preceding 0x (e.g. 0x12AB).

Note, tip

This symbol indicates general notes.

1.4 

Explanation of the warnings

Always observe the warnings in this guide and the 

measures described to avoid hazards.
The warnings used here contain various signal words and 

are structured as follows:

SIGNAL WORD

Type and source of the hazard

Consequences if not complied with

 

Measures to avoid hazards

The individual signal words mean:

  DANGER

The general warning symbol in conjunction with the 

signal word DANGER identifies a hazard which, if not 

avoided, will

 certainly result in death or serious 

injuries

.

1.5 

Technical terms and abbreviations used

FE

Function ground

GND

Electrical ground, 0 V

IODD

IO-Device-Description

IOL

IO-Link

IOW / 

IOLW

IO-Link Wireless

ISDU

IO-Link-Parameter (Index Service Data Unit)

n.a.

Not available

US

Module supply

PD

Process data

PNT

PROFINET

1.6 

Pictures

Product views and pictures in these operating instructions 

may differ from the specified product.

About this guide

BNI PNT-565-W01-K079

Network interface

Содержание BNI PNT-565-W01-K079

































Отзывы: