Balluff Network Interface CC-Link IE Field Basic
www.balluff.com
2
1
General
Structure of the
guide
This guide is arranged so that one section builds upon the other.
Chapter 2: Basic safety instructions
Chapter 3: First steps
….…
Typographical
conventions
The following typographical conventions are used in this manual.
Enumerations
Enumeration is shown in the form of bulleted lists.
•
Entry 1
•
Entry 2
Actions
Action instructions are indicated by a preceding triangle. The result of an action is indicated
by an arrow.
➢
Instruction 1
Result of action
➢
Instruction 2
Actions can also be indicated as numbers in parentheses.
(1)
Step 1
(2)
Step 2
Syntax
Numbers:
Decimal numerals are shown without an additional indicator (e.g. 123).
Hexadecimal numbers are shown with the additional reference hex or 0x (e.g. 0xA3, C2hex).
Cross-references
Cross-references indicate where additional information about the topic can be found.
Symbols
Note
This symbol indicates general notes.
Attention!
This symbol indicates a safety notice which must be observed.
Abbreviations
BNI
Balluff Network Interface
CIB
CC-Link IE Field Basic
EMC
Electromagnetic Compatibility
FE
Function earth
HW
Hardware
IOL
IO-Link
ISDU
IO-Link Parameter (Index Service Data Unit)
N/A
Not available
PLC
Programmable Logic Controller
SIO
Standard in-/outputs
SW
Software
UA
Actuator supply
US
Sensor supply
RWr
Word data input as seen from the master station
RWr
Word data output as
seen from the master station
RX
Bit data input as seen from the master station
RX
Bit data output as seen from the master station
Deviating views
Product views and illustrations in this guide may differ from the actual product.
They are intended only as illustrative material.
