Balluff BIS U-6020-053-10 RS232, Техническое описание, Руководство по эксплуатации

Страница: 24 / 50

BIS U-602_ Processor Unit
TCP/IP / RS232
24
Note
The Gain and Loss parameters are defined in the Antenna type and Cable type fields.
These values are used to determine the maximum permissible radiated power.
The maximum permissible radiated power and factory settings differ depending on
the set country profile. For notes on the applicable directives for various countries,
see "Safety" on pages 5–8 .
In the countries of the European Union and in China, the radiated power is specified in
the form of ERP (max. 2 watts
ERP
).
In the USA, Canada, Mexico, Argentina, Australia, Brazil and Japan, the radiated
power is specified in the form of EIRP (max. 4 watts
EIRP
).
See the "Basic UHF manual" for more information on radiated power.
Enabled:
Enables/disables antennas 1…4.
Factory setting:
antenna 1 enabled, antennas 2…4 disabled.
Antenna type
Selection of the used antenna.
Factory setting:
BIS U-302-C1 or BIS U-302-C0
Port power
For selecting the power on the device (port power).
Factory setting:
22.5 dBm (176 mW) or 20.5 dBm (112 mW)
Antenna power
Power at the antenna (EIRP or ERP).
Factory setting:
27 dBm (500 mW)
Cable type
Selection of the cable used.
Factory setting:
BIS U-500-EF-05
7.5 Transmitting
Power
7
Setting the Processor Unit Parameters