Balluff BCM R15E-00 Series, Руководство пользователя

Страница: 76 / 96

28 english
6
IO-Link interface (continued)
6.2.9 Vibration
The parameters as well as the measurement and analysis
variables of the vibration module are introduced below. The
function of these parameters is explained in section
Vibration on page 10.
Index Sub-
index
Access Description Data
type
Value range Default
value
SUPPORTED VIBRATION PROFILES
0x2100
(8448)
0x01
(1)
Read only VIBRATION VELOCITY LEVEL – For the meaning,
see Tab. 6-14 on page 35
bool
0x02
(2)
Read only VIBRATION VELOCITY LEVEL ADVANCED – For the
meaning, see Tab. 6-14 on page 35
bool
0x03
(3)
Read only VIBRATION ACCELERATION LEVEL – For the
meaning, see Tab. 6-14 on page 35
bool
0x04
(4)
Read only ADVANCED STATISTICS – For the meaning, see
Tab. 6-14 on page 35
bool
0x05
(5)
Read only SEVERITY ZONE – For the meaning, see Tab. 6-14
on page 35
bool
VIBRATION EXPRESS CONFIGURATION
0x2101
(8449)
0x00
(0)
Read/Write APPLICATION TYPE – Selection of profiles for
vibration monitoring for preconfigured applications
(see Application choice (APPLICATION TYPE) on
page 36)
uint8 0…7 4
VIBRATION TIME WINDOW
0x2102
(8450)
0x00
(0)
Read/Write TIME WINDOW VIBRATION – Time window over
which the statistical evaluation of the signal takes
place (see Time window of the vibration module
(TIME WINDOW VIBRATION) on page 37)
uint8 0…4
1)
2
VIBRATION CONFIGURATION
0x2103
(8451)
0x01
(1)
Read/Write EVENT RESPONSE DELAY – Time interval that a
threshold must exceed (or undershoot) so that a
corresponding event is detected (or reset). Value in
ms.
uint16 0…28800
[ms]
1000 [ms]
0x02
(2)
Read/Write LOWER BANDWIDTH LIMIT – Lower limit of the
observed frequency band in Hz
uint16 2…3199
[Hz] 2)
10 [Hz]
0x03
(3)
Read/Write UPPER BANDWIDTH LIMIT – Upper limit of the
observed frequency band in Hz
uint16 2…3199
[Hz]
3)
3199 [Hz]
1)
The time window depends on the lower band limit (for functional description, see page 10)
2)
The lower band limit depends on the time window (for functional description, see page 10)
3) The upper band limit must be higher than the lower band limit
BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor