Balluff BAW M12MH-BLC70G-S04G, Руководство пользователя

Страница: 32 / 100

12 english
6
IO-Link interface (continued)
6.5 System parameters
Index Parameters Subindex Parameters Data format Access Comments
Hex. Dec. Hex. Dec.
000D 13 Profile characteristic 01 1 DeviceProfileID UINT16 Read only Smart sensor profile
02 2 FunctionClassID Binary data channel
04 4 FunctionClassID Process value
05 5 FunctionClassID Teach channel
000E 14 PDInput descriptor 01 1 BDC1,BDC2, BDC3 OctetStringT3 Read only Switching channel
02 2 PDV1 OutOfRange
03 3 PDV2 Position value
Tab. 6-6: System parameters
6.6 Sensor-specific parameters
Index Parameters Subindex Data format
(length)
Access Value range Comments
Hex. Dec. Hex. Dec.
0052 82 Temperature array 00 0 Char (5 bytes) Read only –128…+127 Output of all
temperature
parameters (in °C)
Internal temperature 01 1 Char (1 byte)
Max. temperature startup 02 2 Char (1 byte)
Min. temperature startup 03 3 Char (1 byte)
Max. temperature lifetime 04 4 Char (1 byte)
Min. temperature lifetime 05 5 Char (1 byte)
0056 86 COMx speed 00 0 Char (1 byte) Read only 2 IO-Link COM speed
0057 87 Number of startups 00 0 UINT32 (4 bytes) Read only
0058 88 Operating hours 00 0 UINT32 (4 bytes) Read only
00C0 192 Gradient 00 0 Float32
1)
(4 bytes) Read only Gradient of curve
(output
→
distance)
00C1 193 Offset 00 0 Float32
1)
(4 bytes) Read only Curve offset
(output
→
distance)
00C5 197 Inversion 00 0 UChar (1 byte) Read/Write 0x00-0x01 Curve inversion
00C8 200 Slmin[μm] 01 1 UINT16 (2 bytes) Read/Write 200…3500
2)
200…7000
3)
Current value for
Slmin[μm]
Slmax[μm] 02 2 UINT16 (2 bytes) Read/Write 200…3500
2)
200…7000
3)
Current value for
Slmax[μm]
1) Note that the floating point values are coded as little-endian, so LSB comes first.
2)
For BAW M12MI-BLC35C-S04G
3)
For BAW M12MH-BLC70G-S04G
Tab. 6-7: Sensor-specific parameters
BAW M12MI-BLC35C-S04G and BAW M12MH-BLC70G-S04G
Inductive Linear Position Sensor