Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Attach 2 Brackets (C) to the back of the Console with the Small Screws (A) through the
smaller holes. Screw the remaining Brackets (C) into a wall stud with the Large Screws (B)
2 inches below the Brackets attached to the furniture. Align the Brackets vertically and
string in the Retention Belts (D). Confirm Straps are securely laced and locked.
Ltr.
A
(B)
(A)
(C)
(C)
(D)
2
Small Screw
Retention Belt
Qty.
Hardware Included
ANTI-TIP KIT INSTALLATION (PART B):
B
2
Large Screw
C
4
Bracket
D
2
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
NOTE:
To prevent accidental tipping of the Console, both drawers are equipped
with safety locks which permit only one drawer to be open at a time.
Console
WARNING
Tip-Over Hazard
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Prevent tipping accidents. Anchor your furniture.
WALL STUD
