balfor SHARK Series, Техническое руководство, Страница: 33 / 59

Use and maintenance manual
Circular saw
SHARK
32
3 MACHINE TRANSPORT
During transport:
For cardan models: disconnect the cardan joint and pay attention to driving to
avoid possible damage to the machine.
For electric models: always disconnect the electricity supply.
For road transport appropriate road clearance warning signs must be attached
and the current highway code must be strictly adhered to.
Cardan machines (
C) can be hooked and transported via the tractor's three-point hitch. For connection
to the tractor, see chapter 3.1.
During transport, disconnect the cardan joint and pay attention to driving to
avoid possible damage to the machine.
The machines are equipped with two wheels to allow short movements within the facility.
To move the machine simply bring the two rear galvanised brackets to a horizontal position and use
them to tilt the machine slightly. Do not walk backwards when moving it.
SB ROAD models are equipped with a trolley that can be hooked up to any type of tractor or atv-quad
equipped with a 50 mm (1⅞") ball hitch.
Manual carrying handles Slot for lifting hook
All machines can be lifted and transported by crane or hoist, using hooks and ropes (approved and
suitable for the weight of the machine) which must be hooked to the appropriate slot on the tilting table
indicated by the pictogram on the machine. Use a secure hook (i.e., carabiner hook) for lifting.