balfor SHARK Series, Техническое руководство, Страница: 10 / 59

Use and maintenance manual
Circular saw SHARK 9
1.3 INFORMATION ABOUT THE MACHINE
Before leaving the production plant, this specific model undergoes stringent testing to ensure
maximum reliability and safety.
1.3.1 Intended uses
The models presented in this manual are exclusively designed for cutting solid wood into chunks to be
fed into fireplaces, stoves, wood-burning ovens, boilers, thermal cookers, barbecues and more, or to be
subsequently cut with other machines (e.g., woodcutter).
Any use other than that specified is considered improper.
The person operating the machine must always be positioned in front of the tilting table during use.
Operating position
Machines powered by a cardan shaft and by internal combustion engine must remain connected to the
tractor at all times during use.
The machine cannot be used indoors.
These machines are usually used during the day. If use at night or in reduced visibility conditions is
required, a proper lighting system must be employed around the machine.
Never use the machine in closed or poorly ventilated rooms.