Use and maintenance manual
Chipping machine BF150
14
2.2
SPECIFIC SAFETY REQUIREMENTS
2.2.1
C
ARDAN MODELS
(C)
ATTENTION!
Any maintenance, adjustment and cleaning work must be carried out with the
machine on the ground, the tractor engine switched off, the handbrake on, the
ignition key switched off and removed from the ignition switch.
ATTENTION!
Do not, under any circumstances, stand between the tractor and the machine with
the engine running and the power take-off engaged.
Never use the machine in closed or poorly ventilated rooms (even if doors and windows are open)
as the tractor's exhaust gases are poisonous.
Cardan models can only be used if they are connected to the tractor's three-point hitch.
Disconnect the machine from the tractor only on compact, level ground, making sure it is stationary
and stable.
DANGER!
Check that the drive shaft guards are intact and in good condition.
If the cardan shaft guards break or deteriorate, they must be replaced immediately.
When the machine is not attached to the power unit, the cardan shaft must be placed on the
appropriate support.
