Use and maintenance manual
Chipping machine BF150
11
2
SAFETY REQUIREMENTS
THE FOLLOWING SAFETY INSTRUCTIONS ARE INTENDED TO SAFEGUARD YOUR SAFETY:
YOU SHOULD THEREFORE READ THEM CAREFULLY, MEMORISE THEM AND APPLY THEM AT
ALL TIMES
SAFETY SYMBOL
This symbol highlights messages that are important for the safety and
security of the operator. When encountered, follow the instructions of the
message to which they refer in order to prevent accidents or injuries.
Operate the machine, carry out periodic inspections and maintenance work in accordance with the Use
and Maintenance Manual. Proper maintenance is a guarantee of excellent cutting performance.
The chipping machine was built solely for shredding branches, pruning residues, brushwood, wood
products in general in order to obtain chips and a uniform product suitable for composting.
The warnings in this manual only concern permitted and reasonably foreseeable uses. The indications
below should be supplemented by the common sense and experience of the operator, which are
indispensable measures for accident prevention.
The machine may only be used by authorised, informed and trained personnel who are familiar with its
operation and dangers.
Any changes to the machine not previously authorised by the Manufacturer (in writing) exclude its
liability.
2.1
GENERAL SAFETY AND ACCIDENT PREVENTION RULES
Basic rule: Carry out an inspection of the machine before each start-up.
It is forbidden to use the machine for shredding materials other than those indicated in this manual.
It is forbidden to use the machine in closed places as the exhaust gases of the tractor to which the
machine is to be connected are harmful.
Observe all general safety and accident prevention regulations in addition to the warnings
contained in this manual. Before starting to use the machine, you must be familiar with its features,
all devices, controls and functions.
Before starting work, ensure that the transmission is latched in the working position, that the
tension of the belts is correct and that the hopper is open and secured with the safety pins.
The safety signs attached to the machine
provide a number of very important indications: observing
them serves your safety. Carefully read the safety decals attached to the machine and follow the
instruction
s
. In the event of deterioration or poor legibility of the safety pictograms, clean or replace
them by placing them in the original position.
