If you have any trouble installing your Baldwin product, feel free to call our toll-free Consumer Help Line at 1-800-566-1986. Hours: 6 a.m. – midnight (east coast standard), 7 days a week.
10.
Door Preparation (If Needed)
4
3
Fold hole template along
door edge with face bore
center point 40" from floor.
Tape template to door. Use
template to mark the backset
center point and edge bore
center point.
4
Face Bore:
Very carefully
drill 2
1
⁄
8
" hole into one side of
door face exactly at pencil
marks until drill bit starts to
protrude on opposite side.
Important:
Drill
perpendicularly (at a 90º
angle) to door.
5
Complete drilling hole
from opposite side of door.
1
Pull door toward you to
check if it’s level. Observe
contact of door to jam and
make sure it’s level. Adjust if
necessary.
hole template
low side of bevel
door stop
top of door
2
(Aerial View) To ensure
proper alignment, only use
hole template on side facing
doorstop.
Helpful Hint:
Some doors
have a beveled edge with bevel
facing doorstop.
If you have trouble installing your Baldwin product, feel free to call our toll-free Consumer Help Line at 1-800-566-1986. Hours: 8 a.m. to 8 p.m. E.S.T. - Monday-Friday 10 a.m. to 6 p.m. E.S.T. - Saturday
