VIGIL EVAS BVRD2M
Operating Instructions
BVRD2M issue 2
19
C O M M U N I C A T I O N S
3 Operating Instructions
3.1 I
NTRODUCTION
The VIGIL EVAS BVRD2M is primarily configured using the USB
Configuration Software, however all settings are also available on
the 40 x 2 character LCD front panel display. The navigation
controls as shown in Figure 3.1.
The amount of information that can be displayed at any one time
is limited by the size of display, therefore a comprehensive Menu
Structure is used that (depending on the Access Level) allows
access to all configurable options.
The front panel controls are used to navigate through the Menu
options, and also to edit text if required (e.g. Input and Output
names etc).
A Keyswitch is fitted to the front panel that prevents any
unauthorised or accidental changes to system configuration.
There are also a range of Access Levels that limit the changes that
can be made once the key has been turned.
N
OTE
: It is not recommended to change system settings using the Front
Panel unless you are suitably trained as there is no "undo" facility.
