- 4 -
Issue 6
MOUNTING INSTRUCTIONS
When delivered from the factory, the Eclipse will be supplied on a pallet with a Wall Mounting
Bracket, and depending on the version with Amplifier frames, Microphones (if ordered),
batteries, and BEL1 modules packed separately.
The mounting bracket should be fixed to wall first using suitable bolts for the required
loading. (Centres shown in fig below). The Eclipse then can be fixed on to the mounting
bracket using the 10mm nuts and washers supplied.
Care must be taken to ensure that the wall is strong enough to support the unit, which when
assembled can weigh up to approximately 75KG without batteries.
Diagram Showing Hole
Centres For Mounting
Bracket.
FIG 2
There are a number of ‘knock-outs’ along the top of the box for cable entry, and two in the
base when external batteries are used.
It should be noted that when used for PA only the system is not supplied with any batteries.
It is recommended that the unit is fitted to the wall before the amplifier mainframe(s) and
batteries are installed.
850.0
750.0
710.0
660.0
140.0
90.0
50.0
.0
55
0.
0
52
9.
0
50
0.
0
50
.0
21
.0
.0
A
A
A
A
A
A
A
A
OUTLINE OF ECLIPSE BOX
OUTLINE OF WALL MOUNTING BRACKET
“A” INDICATES FIXING
POSITIONS TO WALL