Baldwin Boxall OmniCarePLUS Multi-Exchange EVC, Руководство по установке

Страница: 32 / 54

OmniCarePLUS Multi-Exchange EVC
Installation Instructions
22
OmniCarePLUS issue 1
4.3.2 Editor Settings
Run the OmniCare Plus software using the "OmniCare Plus -
Editor" shortcut.
Figure 4.8 — OmniCare Plus - Editor icon
The Editor settings allow the user to move the icons for Remote
Units to the required position on the screen.
By default there are 64 Remote Units available and these will all
be displayed if all Remote Units are available in Administration.
If any Remotes have been disabled they will not be available in the
Editor View.
• Double click on the required Console to edit the view.
Figure 4.9 — Console View and "Save Changes" button
• Initially, all icons are "stacked" on top of each other and only
the highest ID Remote is shown. To view all available Remote
Units press the "Align Remotes" button.
Figure 4.10 — "Align Remotes" button
• All available Remotes will then be displayed.

Select the remote to move by pressing and holding the
relevant Icon.
• When all Remotes are in the correct location return to the
main view.
• It is also possible to move the Console Icon on the main
screen. When finished press the "Save Changes" button and
exit the editor.