Baldor NextMove ST, Руководство по установке

Страница: 11 / 72

www.supportme.net
Introduction 2-3 MN1929
2.2 Receiving and inspection
When you receive your NextMove ST, there are several things you should do immediately:
1. Check the condition of the packaging and report any damage immediately to the carrier
that delivered your NextMove ST.
2. Remove the NextMove ST from the shipping container and remove all packing material. The
container and packing materials may be retained for future shipment.
3. Verify that the catalog number of the NextMove ST you received is the same as the
catalog number listed on your purchase order. The catalog/part number is described in
the next section.
4. Inspect the NextMove ST for external damage during shipment and report any damage to
the carrier that delivered it.
5. If the NextMove ST is to be stored for several weeks before use, be sure that it is stored in
a location that conforms to the storage humidity and temperature specifications shown in
section 3.1.1.
2.2.1 Identifying the catalog number
Different models of NextMove ST are available. As a reminder of which product has been
installed, it is a good idea to write the catalog number in the space provided below.
NextMove ST catalog number:
NST002-501 or NST002-502
Installed in:
________________________
Date:
______
A description of the catalog numbers are shown in the following table:
Catalog
number
Description
NST002-501 NextMove ST controller with USB and RS232 serial connections
NST002-502 NextMove ST controller with USB and RS485 serial connections