Baldor NextMove ST, Руководство по установке

Страница: 10 / 72

www.supportme.net
2-2 Introduction MN1929
Included with NextMove ST is the Baldor Motion Toolkit CD. This contains a number of utilities
and useful resources to get the most from you MintMT controller. These include:
H
Mint WorkBench v5
This is the user interface for communicating with the NextMove ST. Installing Mint
WorkBench v5 will also install firmware for NextMove ST.
H
PC Developer Libraries
Installing Mint WorkBench v5 will install ActiveX interfaces that allow PC applications to be
written that communicate with the NextMove ST.
This manual is intended to guide you through the installation of NextMove ST.
The chapters should be read in sequence.
The Basic Installation section describes the mechanical installation of the NextMove ST.
The following sections require knowledge of the low level input/output requirements of the
installation and an understanding of computer software installation. If you are not qualified in
these areas you should seek assistance before proceeding.
Note: You can check that you have the latest firmware and WorkBench v5 releases by
visiting the website
www.supportme.net .