Baldor MintDrive, Руководство по установке

Страница: 27 / 155

14
2.3.4 Wire sizes
Input and output wire size is based on the use of copper conductor wire rated at 167°F (75°C).
The following tables describe the wire size to be used for power connections and the ratings of the
protection devices.
Catalog Number Incoming Power g
D Type
Input
Wire Gauge
Nominal Continuous
D-Type
Input
Input
Fuse
Wire Gauge
Nominal
Input
Voltage
Continuous
Output
Amps
(RMS)
Input
Breaker
(A)
Time
Delay
(A)
AWG mm 2
MD1A02 xx-xxxx 115V (1 φ ) 2.5A 6 6 14 2.5
MD2A02 xx-xxxx 230V (1 φ ) 2.5A 6 6 14 2.5
MD1A05 xx-xxxx 115V (1 φ ) 5A 10 10 14 2.5
MD2A05 xx-xxxx 230V (1 φ ) 5A 10 10 14 2.5
MD1A07 xx-xxxx 115V (1 φ ) 7.5A 16 16 14 2.5
MD2A07 xx-xxxx 230V (1 φ ) 7.5A 16 16 14 2.5
MD1A10 xx-xxxx 115V (1 φ ) 10A 20 20 14 2.5
MD2A10 xx-xxxx 230V (3 φ ) 10A 20 20 14 2.5
MD1A15 xx-xxxx 115V (1 φ ) 15A 32 32 12 2.5
MD2A15 xx-xxxx 230V (3 φ ) 15A 32 32 12 2.5
Note: All wire sizes are based on 75°C copper wire. Higher temperature smaller gauge wire may
be used per NEC and local codes. Recommended fuses/breakers are based on 77°F (25°C)
ambient, maximum continuous control output current and no harmonic current.